Skip to main content

Bill history and bill checks

Energy, water, waste, phone lines, subscriptions and rent tend to arrive as the same bill every month, which makes them easy to glance at and pay. A rate that crept up, a new surcharge or a bill that suddenly doubled can slip through that way.

For every expense invoice, Brikly compares the bill with the earlier bills on the same supplier account and tells you what changed. It does this in two places:

  • On the invoice, in a panel called Compared with earlier bills.
  • On the supplier page, in a Bill history tab with one block per account.

A recent bill with a larger change also shows on Home and with a badge in the invoice list. See Bills with changes to check.

There is nothing to set up. Brikly uses the invoices you have already uploaded, so if you have been sending your bills through Brikly for a few months, the history is already there.

Which bills are compared​

A bill is included when:

  • it is an expense invoice in the Utility, Service, Premises or Other category. Equipment invoices are left out, because a one-off purchase has nothing to compare with;
  • its supplier is confirmed on the invoice. Until then Brikly cannot tell which account the bill belongs to;
  • it is not a credit note or a flagged duplicate.

Bills are grouped by account: the account number printed on the bill as the billing account. Each account number gets its own block and is compared only with itself, so two meters or two sites with the same supplier never get mixed up. A bill with no account number is grouped with the supplier's other bills.

Brikly compares a bill with the bills dated before it, so a bill uploaded late still lands in the right place. All amounts exclude VAT. If you correct a line on an invoice, the comparison uses your correction.

On the invoice: Compared with earlier bills​

Open an expense invoice and, once the supplier is confirmed, the Compared with earlier bills panel sits above the line items. Under the title it shows the account it compared against, for example "Account 4417 2290 · High Street", or "No account number".

The panel shows what changed, that the bill is in line, or how far the comparison got. It is not shown at all when:

  • Brikly cannot work the comparison out. It never shows "all clear" when it does not know;
  • the bill is made only of one-off charges, such as a deposit being returned;
  • Brikly is still reading the invoice.

What changed​

Each change gets its own box: the charge's name as printed on the bill (for a charge billed over several lines, the wording of its largest line), then what changed. Larger changes are highlighted in amber with a warning sign; smaller ones, such as a new charge of a few pounds, sit in a plain box.

You seeWhat it means
Day rate
"Rate changed from £0.2457 to £0.2604 per kWh (+6.0%)."
A charge billed at a rate (per kWh, per m³, per kg, a day or each) costs more or less per unit than last time. Rounding differences are ignored.
Standing charge
"Changed from £18.00 to £21.50 (+19.4%)."
A fixed charge that was the same on the last two bills has changed. A charge that only moved because the bill covered more or fewer days is not flagged.
Bin lift
"Changed from £28.00 to £30.00 a line (+7.1%)."
The same, for a charge billed as several equal lines (two lifts, for example). It is compared a line, so an extra lift is not read as a price change.
Network surcharge
"New charge, £12.40."
A line that has not appeared on this account before, on an account whose usual charges are all on this bill.
Higher than usual
"£14.80 a day against a typical £10.20, about £143 more over 31 days."
The bill as a whole is clearly higher than usual.
Lower than usual
"£8.10 a day against a typical £10.20, about £65 less over 31 days."
The same, the other way round.

The total is compared per day, so a bill that covers 35 days instead of 30 is not mistaken for a rise. Small wobbles are ignored: it takes a clear jump in the daily cost to be called higher or lower than usual.

When Brikly can show that a higher or lower total came from how much you used, it adds a line under it:

  • "Why: usage. 52 kWh a day, up from 35. Rates unchanged."

"Rates unchanged." is there only when every rate on the bill matches earlier bills. When there is no "Why" line, the other changes listed on the panel are what Brikly found; if none are listed, it could not see the reason on the bill, and that is the one most worth a look.

Notes​

Smaller grey lines underneath give context. They are not changes in themselves:

  • "Not on this bill: Meter rental." A charge that usually appears is missing this time.
  • "Usage: 48 kWh a day, up from 35." Usage moved noticeably.
  • "This bill covers 35 days. Earlier bills cover about 30."
  • "Not compared with earlier bills:" followed by a short list of the lines Brikly could not check, each by its name on the bill, such as Standing charge and Night energy. Look at those lines yourself. The list names up to three; when there are more, its last item counts the rest, for example "and 2 more".

In line, or not enough bills yet​

You seeWhat it means
"In line with earlier bills on this account."Every line and the total were compared, and nothing changed.
"The total is in line with earlier bills on this account."The total is in line, but not every line could be compared (a note underneath names them) or a usual charge is missing.
"The charges on this bill are in line with earlier bills on this account."The charges match, but the total was not compared. A second line says why.
"The charges that could be compared are in line with earlier bills on this account."As above, and some lines could not be compared either.
"Nothing on this bill could be compared with earlier bills on this account."There are enough earlier bills, but none of this bill's lines, nor its total, could be matched up with them. No lines are listed. Check the bill by eye.
"No earlier bills on this account to compare with."The first bill on the account.
"2 earlier bills on this account. Nothing to flag so far. The total is compared once there are 3 earlier bills."The checks start as the history builds up. "Nothing to flag so far." appears only when something on the bill was compared and no usual charge is missing.

When the total was not compared, the reason is one of these:

  • "The total is compared once there are 3 earlier bills."
  • "The total is not compared because this bill's period could not be read."
  • "The total is not compared because too few earlier bills can be compared with it."
  • "The total is not compared because this account can have more than one bill for the same period."
  • "The total is not compared because this bill's regular charges could not be totalled."

When each check starts​

CheckStarts from
Rate changedThe second bill on the account
Fixed charge changedOnce the charge has been the same on two bills
New chargeOnce the account has two earlier bills
Higher or lower than usualOnce the account has three earlier bills

What to do about a change​

  1. Open the bill itself and check the line. A misread line can look like a change: correct it on the invoice and the comparison uses the corrected line.
  2. If the bill is right, decide whether you expected it. A price rise your supplier wrote to you about, or a busy month, needs nothing more.
  3. If you did not expect it, query it with your supplier. The panel gives you the old and new figures to quote.

Then review and submit the invoice as usual. The checks never change anything on the invoice or in your accounting platform, and they never stop you submitting.

When the account is listed on the supplier's Bill history tab, a See bill history link at the top of the panel opens it there.

Bills with changes to check​

Suppliers often change a price without telling you, and this is how you find out without opening every bill.

When a bill has a change worth a look, it shows in two more places as well as on the invoice:

  • On Home, under Needs attention.
  • In the invoice list, where the bill has a small Changed badge. It is only a badge: there is no tab or filter for these bills.

Which bills show​

Only bills received in the last 30 days, and only for the larger changes, the ones highlighted in amber on the panel. Smaller changes, the ones in a plain box such as a new charge of a few pounds, show on the bill only. They never reach Home or the invoice list.

On Home​

All your bills with changes share one row in Needs attention. For one bill, the row starts with the supplier's name and says what kind of change it is:

The row saysWhat changed
"Supplier bill is higher than usual"The total is higher than usual.
"Supplier bill is lower than usual"The total is lower than usual.
"Supplier has changed a rate"A rate changed.
"Supplier has changed a charge"A fixed charge changed.
"Supplier bill has a new charge"A new charge appeared.
"Supplier bill has changes to check"More than one kind of change.

Under the title, "Bill dated" gives the bill's date, and Open bill opens it.

For several bills, the row says how many, for example "3 bills have changes to check", lists the suppliers underneath, and Open first bill opens the first of them.

With several sites, the row follows the site you choose on Home.

Mark as checked​

Once you have looked at a bill's changes, click Mark as checked on the Compared with earlier bills panel. The bill leaves Home and loses its Changed badge in the invoice list.

The changes stay on the panel, with a "Checked by" line giving the name of the person who checked the bill and the date. Undo beside it puts the bill back as it was.

If your business has no accounting software connected, a bill with changes still to check is left out when you mark several invoices as complete at once, and Brikly doesn't ask whether to mark it as complete when you leave it. The Mark as complete button on the bill itself still works.

Owners, admins and members can mark a bill as checked and undo it. Viewers can see who checked a bill, but cannot change it.

If a new change appears on a bill you have already marked, the bill shows again. That can happen when an earlier bill is uploaded late and the comparison changes.

Home and the Changed badge can take a couple of minutes to catch up after something else changes, such as a correction to an earlier bill. The panel on the bill itself is always up to date.

On the supplier page: the Bill history tab​

Open the supplier from CostingBrik > Suppliers, or click See bill history on one of its invoices. The Bill history tab appears once the supplier has at least one bill that counts, whether it is an expense supplier or one that also delivers goods. It covers the 13 months up to the supplier's latest bill.

The tab has one block per account, most recent first. Each block's heading shows the account number (or "No account number"), then the site, the category, the number of bills and the date of the last one. A note at the top reminds you that "Amounts exclude VAT."

Spend by bill, or Spend by month​

A bar chart of what the account cost, before VAT. Usually each bar is one bill (Spend by bill). For an account that can have more than one bill for the same period, such as a waste collection billed per lift, the bars are months instead (Spend by month). Hover over a bar for its amount, or click Show amounts to list every figure in a table.

Charges​

One row for each recurring charge on the account, levies included:

  • Latest: the most recent rate (for example "£0.2604 per kWh" or "£0.6532 a day") or, for a fixed charge, the amount. A charge billed at two rates on one bill shows both, for example "£0.2457 and £0.2604 per kWh". A rate in a unit Brikly does not recognise shows with no unit.
  • Previous: the rate or amount before it last changed.
  • Last changed: the date of the bill where it last changed.
  • First seen: the date it first appeared.

Click a charge to open its history: every bill it appeared on, with the Bill date, Quantity, Rate and Amount. Click a date to open that bill.

A charge billed as several equal lines, such as two bin lifts at the same price, shows its price per line under Latest and Previous, so a month with an extra lift is not read as a price change. In its history, the Amount is the bill's total with the number of lines, for example "£56.00 (2 lines)".

Extra charges​

"Surcharges and one-off charges." are grouped by month, with the Surcharges total, the One-offs total and their Share of spend for the month. Click a month to see each line by name, with its Bill date and Amount. This is the place to spot a surcharge that is quietly growing as a share of the bill.

Good to know​

  • No notifications. Changes show on the invoice and on the supplier page, and the larger ones on Home and in the invoice list too. There are no emails or push notifications for them: Home and the Changed badge are the only prompts.
  • Nothing is changed for you. Bill checks only read your invoices. Prices, totals and what goes to your accounting platform stay exactly as they were.
  • Not part of your costings. Like every expense invoice, these bills do not affect ingredient prices or recipe costs.

What it does not do yet​

  • Accounts with several bills a month get the charge checks (rates, fixed charges, new charges) but no comparison of the total.
  • A charge billed at two rates on one bill, such as a price change partway through the billing period, is shown in Bill history but not flagged as a rate change.
  • Lines carrying a supply point or meter number are matched to earlier bills only when the wording is exactly the same.
  • A new metered line beside an existing one in the same unit (a second kWh line, for example) is not called a new charge. It is listed among the lines not compared with earlier bills.
  • Charges re-worded on every bill. If a supplier words its lines differently each time, Brikly may not recognise a genuinely new charge on that account. It errs on the side of saying nothing rather than flagging something wrongly.